搜索结果: 1-15 共查到“工学 sintering”相关记录16条 . 查询时间(0.047 秒)
![](http://www.firstlight.cn/upload/imgfile/202110/21/2021102110140233.png)
中国地质大学科学技术发展院段姗姗(博士研究生),靳洪允等材化学院 Nano Energy , Available online 14 June 2018. Non-equilibrium microstructure of Li1.4Al0.4Ti1.6(PO4)3 superionic conductor by spark plasma sintering for enhanced ionic conductivity(图)
固态;电解质;全固态电池;核心组件
font style='font-size:12px;'>
2021/10/21
近日,能源领域的重要国际期刊《Nano Energy》在线刊发了中国地质大学材化学院侯书恩教授团队的研究成果——Non-equilibrium Microstructure of Li1.4Al0.4Ti1.6(PO4)3 Superionic Conductor by Spark Plasma Sintering for Enhanced Ionic Conductivity。论文第一作者为材化...
The influence of the sintering conditions on the properties of the stainless steel reinforced with TiB2 ceramics
AISI 316L stainless steel TiB2 ceramics Sintering
font style='font-size:12px;'>
2010/1/11
The paper analyzes the influence of the temperature and pressure on the properties and structure of the austenitic AISI 316L stainless steel reinforced with 1% vol.TiB2 ceramics.
Effects of sintering on Y2O3-doped CeO2
Mechanical properties Sintering Grain size
font style='font-size:12px;'>
2009/12/14
Purpose: Having high electrical conductivity, Y2O3-doped CeO2 is a good candidate for various high temperature electrochemical devices, such as solid oxide fuel cells and oxygen gas sensor. However, i...
Effect of the sintering parameters on structure of the gradient tool materials
Powder metallurgy FGM Tool materials SEM
font style='font-size:12px;'>
2009/12/14
Purpose: The purpose of this work was to obtain gradient tool materials, based on the unalloyed steel reinforced with HS6-5-2 high-speed steel, through using the conventional powder metallurgy method ...
Sintering of TiB2-Al composites using HP-HT method
Manufacturing Aluminium TiB2 ceramic
font style='font-size:12px;'>
2009/12/2
Purpose: The subject of the work was to study the effect of the sintering temperature on the properties and structure of TiB2-Al composites.
Design/methodology/approach: TiB2-Al composites reinforced...
Fabrication of nano-structured materials by high-pressure sintering
Powder metallurgy Metal sintering Nanomaterials Crystallite size
font style='font-size:12px;'>
2009/12/2
Purpose: The aim of this work was to fabricate nanocrystalline powders and high-density bulk materials using a sintering
method with limited grain growth so as to maintain nanocrystalline structure o...
Sintering of TiB2 ceramics
Sintering TiB2 Ceramics HT–HP technique
font style='font-size:12px;'>
2009/12/1
Purpose: Titanium diborides (TiB2) ceramic is particularly interesting because it exhibits high elastic modulus
and hardness as well as high thermal conductivity. The interest in TiB2 ceramic increas...
Microstructure of massive iron-carbon alloys obtained by mechanical alloying and sintering
Nanomaterials Bulk materials Mechanical alloying Sintering
font style='font-size:12px;'>
2009/12/1
Purpose: The ultimate aim of this work was to investigate structure and properties massive Fe-6.67%mass.C and
Fe-0.4%mass.C materials obtained by mechanical alloying and sintering.
Design/methodolog...
Sintering of Ni-Mo-W steels and their properties
Manufacturing and processing Powder metallurgy Sintering Low alloyed steels Sinter-hardening
font style='font-size:12px;'>
2009/12/1
Purpose: The paper focuses on microstructural and mechanical characteristics of Ni-Mo and Ni-Mo-W sintered
steels with increasing amount of tungsten, low and high addition of carbon.
Design/methodol...
Electric current activated/assisted sintering (ECAS): a review of patents 1906–2008
patents spark plasma sintering pulsed electric current sintering
font style='font-size:12px;'>
2010/1/19
The electric current activated/assisted sintering (ECAS) is an ever growing class of versatile techniques for sintering particulate materials. Despite the tremendous advances over the last two decades...
Effect of Oxygen Content on the Sintering Behaviour of Silver Nanopowders Produced by Inert Gas Condensation
Inert gas condensation Ag nanopowders Sintering
font style='font-size:12px;'>
2009/10/12
Polymer-based materials are made electrically conductive by combining with a particulate conductive material. Instead of using high aspect-ratio conventional fillers, such as fibres and flakes, highly...
Investigation of Influences of Pressing Pressure and Sintering Temperature on the Mechanical Properties of Al-Al4C3 Composite Materials
Mechanical alloying Aluminum Carbide Mechanical properties
font style='font-size:12px;'>
2009/10/12
In this study, Al powders containing 3% wt carbon black were mechanically alloyed in a high energy ball mill for 20 h. Mechanically alloyed powders were compacted at various pressures (400, 500, 600, ...
Effect of starting powders on the sintering of nanostructured ZrO2 ceramics by colloidal processing
nanostructured zirconia colloidal processing two-step sintering
font style='font-size:12px;'>
2010/1/19
The effect of starting powders on the sintering of nanostructured tetragonal zirconia was evaluated. Suspensions were prepared with a concentration of 10 vol.% by mixing a bicomponent mixture of comme...
Fabrication of crystal-oriented barium-bismuth titanate ceramics in high magnetic field and subsequent reaction sintering
magnetic field lead-free piezoelectric ceramics sintering
font style='font-size:12px;'>
2010/1/18
High magnetic field was applied to fabricate novel lead-free piezoelectric ceramics with a textured structure. A compact of crystallographically oriented grains was prepared by dry forming in a high m...
The Formation and Stability of γ-Aluminum Oxynitride Spinel in the Carbothermal Reduction and Reaction Sintering Processes,
font style='font-size:12px;'>
2007/7/28
期刊信息
篇名
The Formation and Stability of γ-Aluminum Oxynitride Spinel in the Carbothermal Reduction and Reaction Sintering Processes,
语种
英文
撰写或编译
作者
Li Yawei Li Nan , Yuan Runzhang
第一作者单位
刊物名称
Journla o...