工学 >>> 力学 农业工程 林业工程 工程与技术科学基础学科 测绘科学技术 材料科学 矿山工程技术 石油与天然气工程 冶金工程技术 机械工程 光学工程 仪器科学与技术 动力与电气工程 能源科学技术 核科学技术 电子科学与技术 信息与通信工程 控制科学与技术 计算机科学技术 化学工程 纺织科学技术 印刷工业 服装工业、制鞋工业 轻工技术与工程 食品科学技术 土木建筑工程 水利工程 交通运输工程 船舶与海洋工程 航空、航天科学技术 兵器科学与技术 环境科学技术 安全科学技术 工业设计
搜索结果: 1-15 共查到工学 ultrasonic相关记录51条 . 查询时间(0.062 秒)
On the Phonetic Information in Ultrasonic Microphone Signals     Speech recognition  ultrasonic  multimodal       font style='font-size:12px;'> 2014/11/27
On the Phonetic Information in Ultrasonic Microphone Signals.
To measure the depth of fire-damaged concrete by ultrasonic method, it was traditionally assumed that the concrete of the fire-damaged structural member could be simply classified into damaged layer a...
An ultrasound-assisted aldol condensation reaction has been developed for a range of ketones with a variety of aromatic aldehydes using poly(N-vinylimidazole) as a solid base catalyst in a liquid-soli...
A series of graphene-TiO2 composites was fabricated from graphene oxide and titanium n-butoxide (TNB) by an ultrasonic-assisted method. The structure and composition of the nanocomposites were charact...
In this study, nanoemulsions containing omega-3 oil from Echium plantagineum seed and stabilized by Whey Protein Isolate (WPI) were prepared using ultrasonic emulsification technique. The ultrasonic p...
The success of ultrasonic nondestructive testing technology depends not only on the generation and measurement of the desired waveform, but also on the signal processing of the measured waves.
The success of ultrasonic nondestructive testing technology depends not only on the generation and measurement of the desired waveform, but also on the signal processing of the measured waves.
Ultrasonic guided wave inspection is an effective non-destructive testing method which can be used for stress level evaluation in steel strands. Unfortunately the propagation velocity of ultrasonic gu...
应用设计的微波超声波耦合动态逆流浸提机,以水为溶剂,茶鲜叶为原料,进行了茶叶有效成分的浸提试验。研究了浸提功率、料液比和浸提时间3因素对茶叶主要有效成分浸提率的影响,并通过L9(34)正交试验设计,对浸提工艺进行优化。结果显示,该设备的最佳浸提工艺参数为:浸提时间6min(微波)+6min(超声波),料液比1∶20,浸提功率1.0kW(微波)+1.0kW(超声波)。茶多酚、氨基酸、咖啡碱的...
利用燕麦蛋白制备ACE抑制肽时先利用超声波对燕麦蛋白原料进行预处理研究。以ACE抑制活性和水解度为指标,考察了超声波功率、处理时间、超声波工作/间歇时间对燕麦蛋白预处理效果的影响。结果表明,超声波预处理的最佳工艺参数为:超声波功率500W,处理时间20min,超声波工作时间2 s、间歇时间2 s,该条件下酶解产物对ACE的半抑制浓度IC50值从0.533mg/mL降到0.299mg/mL...
为了得到纤维素酶协同超声波法提取苦瓜多糖的最佳工艺条件,利用Box-Behnken的中心组合设计及响应面法(RSM)探讨了超声波功率、酶量、料液比、时间、pH值和温度等因素的优化组合,通过建立二次回归模型,确定其最佳提取工艺条件为: 超声波功率390W、纤维素酶量3500U/ g(酶活200U/mg以上)、料液比1∶38、时间40min、pH值5、温度56℃。在此工艺条件下,苦瓜多糖...
This paper studies the static deformation behavior of a piezoelectric micromachined ultrasonic transducer (PMUT) actuated by a strong external electric field. The transducer membrane consists of a pie...
The traditional one-dimensional ultrasonic beam steering has time delay and is thus a complicated problem. A numerical model of ultrasonic beam steering using Neumann boundary condition in multiplysic...
A sampler using inertial fibrous filters (INF) has been recently developed for ultrafine particle collection by impaction and filtration. This new sampler has a low pressure drop (20–30 kPa) and can ...
The theory of acoustoelasticity has been the main concept behind most studies investigating the stress level in different structural materials. In this paper, an alternative approach for stress assess...

中国研究生教育排行榜-

正在加载...

中国学术期刊排行榜-

正在加载...

世界大学科研机构排行榜-

正在加载...

中国大学排行榜-

正在加载...

人 物-

正在加载...

课 件-

正在加载...

视听资料-

正在加载...

研招资料 -

正在加载...

知识要闻-

正在加载...

国际动态-

正在加载...

会议中心-

正在加载...

学术指南-

正在加载...

学术站点-

正在加载...