搜索结果: 1-15 共查到“moulds”相关记录31条 . 查询时间(0.093 秒)
Treatment of rubberwood (Hevea brasiliensis) (Willd.ex A.Juss.) Müll.Arg.with maleic anhydride to prevent moulds
wood modification mold prevention leaching wood moisture content
font style='font-size:12px;'>
2016/8/2
The rubberwood samples were treated with 0.5–10% maleic anhydride (MA) solutions. The treatment of wood with 2.5% MA was adequate to prevent the growth of moulds on wood for 1 year at least. The viabl...
Application of High Resolution Scanning Systems for Virtual Moulds and Replicas of Sculptural Works
3D Modelling High resolution scanning Tracking system Cultural Heritage Sculpture Prototyping
font style='font-size:12px;'>
2015/11/12
The paper presents a project aimed at setting up methods and tools for creating virtual moulds of sculptural works using laser tracking technology in tandem with an hand-held scanner. In the second pa...
Moulds occurrence in woodchips
microbiology hygienic risks microscopical fibrous fungi
font style='font-size:12px;'>
2014/11/28
The research, whose results are presented, is aimed at determination of development of moulds number in wood chips
under different storage temperatures. The experiments were carried out with the moi...
《Moulds isolation,cultivation, identification》
Moulds isolation cultivation identification
font style='font-size:12px;'>
2014/7/18
《Moulds isolation,cultivation, identification》。
Influence of the method of heating/cooling moulds on the properties of injection moulding parts
Engineering polymers Working properties of materials and products Crystallinity
font style='font-size:12px;'>
2009/12/2
Purpose: The main purpose of carry out research was estimate the influence thermal conditions of the mould on
properties of injection moulded parts.
Design/methodology/approach: The properties of st...
An Intelligent Cavity Layout Design System for Injection Moulds
Intelligent design cavity layout design injection mould design case-based reasoning
font style='font-size:12px;'>
2009/8/19
This paper presents the development of an Intelligent Cavity Layout Design System (ICLDS) for multiple cavity injection moulds. The system is intended to assist mould designers in cavity layout design...
Effect of modifying process on mechanical properties of EN AB-42000 silumin cast into sand moulds
Aluminum alloys Modification Mechanical properties
font style='font-size:12px;'>
2011/4/1
Technological and mechanical properties of Al-Si casting alloys depend in a considerable extend upon structure of eutectic mixture, which is modified through introduction of micro-additions into liqui...
Selection of the temperature of casting the bronzes to plaster moulds
Innovative materials and casting technologies Cast bronzes Selection of the temperature of casting Plaster mould Thermal
font style='font-size:12px;'>
2011/4/1
The results of the investigations of the process of solidification of the bronze CuSn5Zn5Pb5-C (B555) and CuSn10-C (B10) in the hot plaster mould show in the work. For four temperatures of casting: 12...
Evolution of the gas atmosphere during filing the sand moulds with iron alloys
Reoxidation Mould atmosphere Thermo chemical analysis
font style='font-size:12px;'>
2011/4/1
Evolution of atmosphere of the mould cavity when pouring the cast iron has been analyzed. It was find that in dry sand mold the cavity is filled by air throughout the casting time. In green sand the a...
The thermal analysis and derivative bronzes cast to plaster moulds
Innovative materials and casting technologies Method TDA Casting bronzes Plaster mould Microstructure
font style='font-size:12px;'>
2011/3/31
It plaster moulds gets casted the alloys of following metals: Al, Cu, Ag, Au in precise and artistic founding. The investigation of the crys-tallization of bronzes in hot plaster moulds the method of...
The thermal analysis and derivative bronzes cast to plaster moulds
Innovative materials and casting technologies Method TDA Casting bronzes Plaster mould Microstructure
font style='font-size:12px;'>
2011/3/31
It plaster moulds gets casted the alloys of following metals: Al, Cu, Ag, Au in precise and artistic founding. The investigation of the crys-tallization of bronzes in hot plaster moulds the method of...
Effect of modifying process on mechanical properties of EN AC-43300 silumin cast into sand moulds
Aluminum alloys Mechanical properties Crystallization
font style='font-size:12px;'>
2011/3/31
Significance of alloy modification in course of casting process is the most explicitly visible on example of Al-Si alloys. Broad application of these alloys in foundry industry has become possible aft...
Effect of modifying process on mechanical properties of EN AC-43300 silumin cast into sand moulds
Aluminum alloys Mechanical properties Crystallization
font style='font-size:12px;'>
2011/3/31
Significance of alloy modification in course of casting process is the most explicitly visible on example of Al-Si alloys. Broad application of these alloys in foundry industry has become possible aft...
Assessment of the possibility of utilisation of used ceramic moulds originated from the investment casting technology
investment casting reclamation of used sand leaching of used sand management of waste
font style='font-size:12px;'>
2011/3/30
Review of wastes generated by investment casting technology and discussion on possibilities of disposal of the largest quantity waste from this technology - used ceramic mould is presented in the pap...
Assessment of the possibility of utilisation of used ceramic moulds originated from the investment casting technology
investment casting reclamation of used sand leaching of used sand management of waste
font style='font-size:12px;'>
2011/3/30
Review of wastes generated by investment casting technology and discussion on possibilities of disposal of the largest quantity waste from this technology - used ceramic mould is presented in the pap...